{
 "terms": {
  "title": "Terms of service",
  "body": "In short\nBefore you submit a file: by requesting a quote or submitting a design, you're agreeing to these terms, which cover our manufacturing limits, your responsibilities, and how liability works.\n\n1. Manufacturing & technical limitations\n3D printing is a specialized additive manufacturing process. By using our services, you acknowledge the following:\n- Layer lines & finish: unless otherwise specified, parts are provided \"as-printed.\" Visible layer lines and small artifacts from support structures are a normal part of the process and are not considered defects.\n- Dimensional accuracy: while we strive for precision, 3D printing involves material shrinkage and thermal expansion. Standard tolerances are approximately ±0.2mm to ±0.5mm. If your project requires press-fit precision, this must be disclosed and quoted specifically.\n- Post-processing: standard quotes cover the removal of support material only. Extensive sanding, chemical smoothing, painting, or assembly are additional services and must be requested at the time of the quote.\n\n2. Material suitability & safety\nWe offer a variety of polymers (PLA, PETG, ABS, ASA, TPU, etc.). It is the customer's responsibility to select a material suitable for their environment.\n- Heat resistance: materials like PLA will deform if left in a hot car or direct sunlight. We are not liable for heat-related deformation if a lower-temperature material was selected by the customer.\n- Food safety: most 3D prints are not food-safe due to the porous nature of the layers, which can harbor bacteria. We do not certify any prints for direct food contact or medical use.\n- UV exposure: standard plastics may degrade or become brittle under prolonged outdoor UV exposure unless a UV-resistant material (like ASA) is specifically requested.\n\n3. Intellectual property & legality\nEric's 3D Services respects the law and intellectual property rights. We operate under the following rules:\n- Warrant of ownership: you warrant that you own the digital files submitted or have a license allowing for their physical reproduction. We are not liable for copyright or patent infringement resulting from your submitted designs.\n- Proprietary designs: we will never share, sell, or publicly display your proprietary designs (prototypes or inventions) without your express permission.\n- Firearms & weapons: in accordance with federal and state regulations, we will not print components for firearms, \"ghost gun\" parts, or items classified as weapons. We reserve the right to cancel any order that appears to violate this policy.\n\n4. Quotes, payments & cancellations\n- Quote expiration: quotes are valid for 30 days. After this period, material costs and machine availability may require a re-quote.\n- Order finality: once production (printing) has begun, the order cannot be cancelled or refunded. The customer is responsible for the cost of the plastic and machine time already consumed.\n- Design changes: if you submit a revised file after a quote has been accepted, a new quote will be issued to account for changes in material usage and print time.\n\n5. Limited liability & warranty\nUse at your own risk: Eric's 3D Services provides custom-manufactured items \"as-is.\" We do not offer a warranty on the longevity or performance of a part once it leaves our shop.\n- We are not liable for any damages (direct, indirect, or consequential) resulting from the failure of a 3D printed part, including but not limited to equipment damage or personal injury.\n- Our total liability is limited to the replacement of the part or a refund of the purchase price, at our sole discretion.\n\n6. Shipping & local pickup\n- Pickup: for customers in the Saint Albans area, local pickup is by appointment only. We do not have a public storefront for walk-ins.\n- Shipping damage: if an item arrives broken due to shipping, you must contact us within 48 hours with photographic evidence of the damaged packaging and the item.\n\n7. Governing law\nThese terms shall be governed by the laws of the State of Maine. Any legal proceedings related to these terms shall be conducted in Somerset County, Maine."
 },
 "privacy": {
  "title": "Privacy policy",
  "body": "In short\nWe're based in Saint Albans, Maine, and committed to protecting your personal information, including the 3D design files you trust us with.\n\n1. Introduction\nWelcome to Eric's 3D Services (\"we,\" \"our,\" or \"us\"). We are based in Saint Albans, Maine, and are committed to protecting your personal information and your right to privacy. This Privacy Policy explains how we collect, use, disclose, and safeguard your information when you visit https://erics3dservices.com, use our services, or communicate with us regarding your 3D printing projects.\nPlease read this privacy notice carefully as it will help you understand what we do with the information that we collect.\n\n2. Information we collect\nWe collect personal information that you voluntarily provide to us when you express an interest in obtaining information about us or our products and services, when you request a quote, or when you contact us. The personal information that we collect depends on the context of your interactions with us and may include the following:\n- Contact information: names, email addresses, phone numbers, and mailing or shipping addresses.\n- Billing information: payment details, billing addresses, and transaction history. We use secure third-party payment processors and do not store full credit card numbers on our servers.\n- Project & intellectual property data: 3D design files (such as .STL, .OBJ, .STEP), sketches, dimensions, and descriptions of the items you wish to have printed. We treat your intellectual property with the utmost confidentiality.\n- Automatically collected information: we may automatically collect certain information when you visit our website, such as your IP address, browser and device characteristics, operating system, and information about how and when you use our site.\n\n3. How we use your information\nWe use the information we collect or receive for the following business purposes:\n- To fulfill and manage your orders: we use your information to provide quotes, process payments, print your 3D models, and arrange for local pickup in Saint Albans or direct shipping.\n- To protect your intellectual property: we use your design files exclusively for evaluating, quoting, and printing your project. We will never sell, distribute, or reuse your proprietary files for other customers without your explicit written consent.\n- To communicate with you: we use your email or phone number to send you project updates, clarify design requirements, and respond to your inquiries.\n- To improve our services: we may use feedback and general usage data to improve our website, our printing processes, and the overall customer experience.\n\n4. How we share your information\nWe only share information with your consent, to comply with laws, to provide you with services, to protect your rights, or to fulfill business obligations. We may share data with:\n- Service providers: third-party vendors that perform services for us, such as payment processing (e.g. PayPal), shipping providers (e.g. USPS, UPS), and website hosting.\n- Legal obligations: we may disclose your information where we are legally required to do so in order to comply with applicable law, governmental requests, a judicial proceeding, court order, or legal process.\nWe do not sell, rent, or trade your personal information or your 3D design files to third parties for marketing purposes.\n\n5. Cookies & tracking\nWe may use cookies and similar tracking technologies (like web beacons and pixels) to access or store information. You can set your browser to refuse all or some browser cookies, or to alert you when websites set or access cookies. If you disable or refuse cookies, some parts of our website may become inaccessible or not function properly.\n\n6. Data retention\nWe will only keep your personal information and project files for as long as necessary for the purposes set out in this Privacy Policy, unless a longer retention period is required or permitted by law (such as tax, accounting, or other legal requirements). By default, we retain your 3D design files for a limited period after project completion to make re-ordering easier, but you may request that we delete your files immediately upon completion of your order.\n\n7. Data security\nWe have implemented appropriate technical and organizational security measures designed to protect the security of any personal information we process. However, despite our safeguards and efforts to secure your information, no electronic transmission over the internet or information storage technology can be guaranteed to be 100% secure, so we cannot promise or guarantee that hackers, cybercriminals, or other unauthorized third parties will not be able to defeat our security.\n\n8. Your privacy rights\nDepending on your location, you may have certain rights regarding your personal information, which may include the right to:\n- Request access to and obtain a copy of your personal information.\n- Request that we update or correct inaccuracies in your personal information.\n- Request the deletion of your personal data and 3D files.\n- Opt out of receiving marketing communications from us.\nTo exercise any of these rights, please contact us using the information below.\n\n9. Children's privacy\nOur services are not directed to, and we do not knowingly collect personal information from, children under the age of 13. If we become aware that we have collected personal information from a child under 13 without verification of parental consent, we will take steps to remove that information from our servers.\n\n10. Updates to this policy\nWe may update this privacy notice from time to time. The updated version will be indicated by an updated \"Last updated\" date at the top of this policy. We encourage you to review this notice periodically to stay informed of how we are protecting your information.\n\n11. Contact us\nIf you have questions or comments about this notice, your privacy rights, or how we handle your 3D files, you may contact us at:"
 },
 "returns": {
  "title": "Returns and refunds",
  "body": "In short\nBecause every print is custom-made to order, all sales are final. Genuine manufacturing defects are covered, see below for exactly what that means.\n\n1. General no-return policy\nDue to the bespoke nature of 3D printing, items are custom-made to order and cannot be resold. We do not accept returns, exchanges, or change-of-mind cancellations once production has started, and we don't offer refunds for items the customer no longer wants or ordered by mistake.\n\n2. Non-refundable design & labor\nAny fees for 3D modeling, file repair, or custom slicing are non-refundable. These fees represent time and labor already spent, regardless of the final physical outcome or your satisfaction with the design aesthetics.\n\n3. Customer-provided files\nWe're not responsible for a print failing due to design flaws in a customer-provided file. Refunds or free reprints will not be issued if:\n- The part doesn't fit its intended application due to incorrect measurements in your design.\n- The part fails structurally due to poor engineering or insufficient wall thickness in the digital model.\n- The customer selected an inappropriate material, for example choosing PLA for a high-heat automotive application.\n\n4. Defective merchandise claims\nWe take pride in our work, but 3D printing is an additive process that may include minor cosmetic variations. A refund or reprint is only considered if there's a major manufacturing defect, for example significant layer separation or incorrect material usage.\n- 48-hour reporting window: any defect claim must be reported via email within 48 hours of local pickup or delivery confirmation. Claims made after this window will be rejected.\n- Evidence required: high-resolution photographs and, if requested, a video of the defect.\n- Return for inspection: we reserve the right to require the defective part be returned, at the customer's expense, to Saint Albans, Maine for physical inspection before any refund or reprint is authorized.\n\n5. Exclusions from defective status\nThe following are inherent to the 3D printing process and are not grounds for a refund or return:\n- Visible layer lines or seams.\n- Small surface artifacts or \"zits\" from support structures.\n- Minor color variations between filament batches.\n- Dimensional variances within ±0.5mm.\n\n6. Shipping & pickup\n- Original shipping: non-refundable under all circumstances.\n- Return shipping: the customer is responsible for all costs of shipping an item back to us for inspection.\n- Unclaimed pickups: for local orders in Saint Albans, items not picked up within 30 days of completion will be forfeited and recycled. No refunds are issued for abandoned orders.\n\n7. Refund method\nIn the rare event a refund is authorized, it's issued to the original payment method, minus a 20% processing and material waste fee. Please allow 5-10 business days for the credit to appear on your statement."
 },
 "shipping-policy": {
  "title": "Shipping policy",
  "body": "In short\nMost orders ship in 2-7 business days depending on whether it's a catalog item or a custom upload. Local pickup is free for customers near Saint Albans.\n\n1. Processing & lead times\nBecause our products involve specialized manufacturing, processing times are divided into two categories:\n- Catalog orders: items ordered directly from our pre-designed catalog typically ship within 2-4 business days.\n- Custom prints: processing for custom uploads depends on size, material, and complexity. Most custom projects ship within 3-7 business days.\n- Rush service: need it faster? We offer a 48-hour rush production service for an additional 25% fee on the total order cost, moving your project to the front of our print queue.\n\n2. Carriers & tracking\nWe use the following carriers to ensure reliable delivery:\n- Carriers: USPS, UPS, FedEx, and DHL.\n- Tracking: once your order is packaged and a label is created, a tracking number is automatically emailed to the address provided at checkout.\n- Local pickup: customers in the Saint Albans, Maine area may opt for free local pickup. We'll contact you to coordinate a window once your order is ready.\n\n3. Restricted shipping states\n[[blocked-states]]\n\n4. Domestic & international shipping\n- Domestic: we ship to every US state we are not restricted from (see section 3).\n- International: we currently ship to the United States and Canada only.\n- Customs & duties: for Canadian orders, the customer is solely responsible for any import duties, taxes, or brokerage fees incurred at the border. We can't predict or control these charges.\n\n5. Lost or damaged packages\nWe take care in packaging our prints to survive the journey, but we understand that accidents happen during transit.\n- Reporting window: if your package arrives damaged, contact us within 48 hours of delivery confirmation.\n- What we need: clear photos of both the damaged item and the exterior packaging.\n- Resolution: once verified, we'll issue a full refund or a one-time replacement at no additional cost to you.\n\n6. Incorrect addresses\nWe're not responsible for orders shipped to an incorrect address provided by the customer. If a package is returned to us as undeliverable, the customer is responsible for additional shipping costs to resend the item."
 },
 "cookies": {
  "title": "Cookie policy",
  "body": "Overview\nThis Cookie Policy explains how Eric's 3D Services (\"we,\" \"us,\" and \"our\") uses cookies and similar technologies to recognize you when you visit our website, what these technologies are, why we use them, and your rights to control our use of them.\n\n1. What are cookies?\nCookies are small data files placed on your computer or mobile device when you visit a website. They're widely used by website owners to make their websites work, or work more efficiently, and to provide reporting information.\n\n2. Why we use cookies\nWe use first-party and third-party cookies for several reasons. Some are required for technical reasons in order for our website to operate, for example keeping your 3D model in the shopping cart. Others help us understand and improve how visitors use our site.\n\n3. Types of cookies we use\nStrictly necessary to provide services available through our website, such as secure login areas and shopping cart functionality.\nCollect information used in aggregate to help us understand how our website is being used, for example which pages are most popular.\nRemember choices you make, such as your username or language, for a more personalized experience.\nUsed to make advertising messages more relevant to your interests, for example showing related ads if you have visited our portfolio.\n\n4. How can you control cookies?\nYou have the right to decide whether to accept or reject cookies. You can set or amend your web browser controls to accept or refuse cookies. If you reject cookies, you can still use our website, though some functionality may be restricted, for example your shopping cart may not save between sessions.\n- Browser settings: you'll typically find these in the \"Options\" or \"Preferences\" menu of your browser.\n- Third-party opt-out: to opt out of being tracked by Google Analytics across all websites, visit Google's opt-out page.\n\n5. Changes to this policy\nWe may update this Cookie Policy from time to time to reflect changes to the cookies we use, or for other operational, legal, or regulatory reasons. Please revisit this policy periodically to stay informed.\n\n6. Contact us\nIf you have questions about our use of cookies or other technologies, you can reach us at:"
 },
 "acceptable-use": {
  "title": "Acceptable use policy",
  "body": "Overview\nThis Acceptable Use Policy outlines the standards and restrictions for projects submitted to Eric's 3D Services. We reserve the right to refuse any project, at our sole discretion, that we believe violates the law, safety standards, or our company values.\n\n1. Prohibited manufacturing\nWe strictly prohibit the use of our services for the production of the following:\nFunctional firearms, firearm components (including but not limited to frames, receivers, magazines, or silencers), or any parts intended to bypass weapons regulations. This includes \"ghost gun\" components and items that violate the Undetectable Firearms Act, plus parts for explosives or other lethal weaponry.\nCopyrighted or trademarked material where the customer does not have verifiable authorization from the rights holder. We will not print proprietary designs, logos, or characters for commercial resale without proof of license.\nAnything illegal to possess, manufacture, or distribute in Saint Albans, Maine, the United States, or your specific jurisdiction. This includes drug paraphernalia or tools designed specifically for criminal activity.\nItems intended to deceive others, such as counterfeit currency, fake identification, forged badges, or replicas designed to be passed off as authentic high-value goods.\nItems that promote, facilitate, or encourage violence, hate speech, or discrimination based on race, religion, gender, sexual orientation, or disability. We will not manufacture trophies or symbols of hate groups.\nComponents intended for aerospace, aviation, or life-critical medical applications. We're a specialized hobbyist and prototyping shop, not a certified ISO/AS9100 environment, and can't guarantee the material traceability or structural certification these high-risk industries require.\n\n2. Restricted content\nSexually explicit content: we generally do not print sexually explicit material. We may consider requests for anatomical models, classical art reproductions, or educational tools on a case-by-case basis, provided they don't violate local obscenity laws.\n\n3. Right to refuse\nWe remain the final arbiter of what's acceptable for our machines. If a design appears borderline or unsafe for our specific equipment, for example designs that could damage machines or release toxic fumes, we'll cancel the order and provide a full refund if production hasn't started.\n\n4. Reporting & legal compliance\nIf we receive a request to print items that suggest an immediate threat to public safety or a violation of federal law, specifically regarding illegal firearms, we reserve the right to report such requests to the appropriate law enforcement authorities."
 },
 "dmca": {
  "title": "Copyright (DMCA)",
  "body": "Overview\nEric's 3D Services (\"Company,\" \"we,\" \"us,\" or \"our\") respects the intellectual property rights of others and expects our users to do the same. In accordance with the Digital Millennium Copyright Act of 1998 (the \"DMCA\"), the text of which may be found on the U.S. Copyright Office website, we will respond promptly to claims of copyright infringement.\n\n1. Notice of copyright infringement\nIf you are a copyright owner (or authorized to act on behalf of one) and believe that a digital file uploaded to our site or a physical item being manufactured by us infringes upon your copyright, please submit a written notification to our designated copyright agent.\nYour notice of infringement must include the following:\n- A physical or electronic signature of the copyright owner or a person authorized to act on their behalf.\n- Identification of the copyrighted work claimed to have been infringed, for example a link to your original 3D model or a registration number.\n- Identification of the material claimed to be infringing and that is to be removed or disabled, with information reasonably sufficient for us to locate it, such as a specific URL or order number.\n- Your contact information, including address, telephone number, and email address.\n- A statement that you have a good faith belief that use of the material in the manner complained of is not authorized by the copyright owner, its agent, or the law.\n- A statement that the information in the notification is accurate, and under penalty of perjury, that you are authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.\n\n2. Designated copyright agent\nPlease send all DMCA notices to our designated agent at the following address:\n\n3. Counter-notification procedure\nIf you believe your content was removed or disabled by mistake or misidentification, you may file a counter-notification with us. To be effective, the counter-notification must be a written communication that includes:\n- Your physical or electronic signature.\n- Identification of the material that was removed or disabled and its location before removal.\n- A statement, under penalty of perjury, that you have a good faith belief the material was removed or disabled as a result of mistake or misidentification.\n- Your name, address, and telephone number, and a statement that you consent to the jurisdiction of the Federal District Court for the judicial district in which your address is located, or Somerset County, Maine, if your address is outside the United States.\n\n4. Repeat infringer policy\nWe take intellectual property seriously. It is our policy, in appropriate circumstances, to terminate accounts or refuse service to users who are repeat infringers or who are repeatedly charged with infringement.\n\n5. Misrepresentations\nPlease note that under Section 512(f) of the DMCA, any person who knowingly materially misrepresents that material or activity is infringing may be liable for damages, including costs and attorney's fees."
 },
 "accessibility": {
  "title": "Accessibility statement",
  "body": "Our commitment\nWe strive to meet WCAG 2.1 AA accessibility standards across our website, for every visitor regardless of how they browse.\n\nWhat we've built in\n- Semantic HTML and ARIA labels throughout\n- Keyboard navigation supported on all interactive elements\n- Sufficient color contrast in both light and dark modes\n- Resizable text without breaking layout\n- Alt text on meaningful images\n\nFound a barrier?\nIf you run into anything that doesn't work the way it should, email ericm@erics3dservices.com and we'll address it promptly."
 },
 "data-deletion": {
  "title": "Data deletion",
  "body": "In short\nYou're in control of your data. This page explains how to request deletion, what actually happens to your information, and what we're required to keep.\n\n1. Overview\nYou can request that Eric's 3D Services delete the personal data we hold about you. This page explains how to do that, what we delete, what we're required to retain, and how this works if you've ever signed in with a third-party account like Google or Discord.\n\n2. Requesting deletion\nThe fastest way to request deletion is directly from your account -- no ticket needed:\nUnder Your data, you can request deletion of your account directly. You'll need to confirm by typing DELETE, and we'll send you a confirmation email so there's a record of the request.\nIf you can't access your account -- for example, it's already been deleted, or you never created one but believe we hold information about you -- contact us using the support form or the email address at the bottom of this page. We'll ask for enough information to verify it's really your data before acting on the request, since we won't delete someone's account just because a stranger asked.\n\n3. What happens after you request it\nDeletion isn't instant -- it's scheduled 30 days out from when you request it. We do this on purpose: it gives you a real window to change your mind (you can cancel the pending deletion from the same Account Settings page at any time before that date) and it protects you from someone else triggering deletion on your account by mistake or out of malice.\nOnce the 30 days pass, the deletion runs automatically. There's no further action needed on your part, and no further email warning right before it happens -- the 30-day notice you get at request time is the only warning, so don't request deletion unless you're sure.\n\n4. What gets deleted\nWhen your account is purged, we replace your personal identifying information with anonymized placeholders across our systems. This includes:\n- Your profile: name, email, and phone number on your account.\n- Saved addresses: these are hard-deleted, not anonymized -- they're removed outright since they have no ongoing business purpose once your account is gone.\n- Linked sign-in accounts: any Google, Facebook, Twitch, Discord, or Instagram connection on file is removed. See section 6 for more on this.\n- Stored authentication data: your password and any active sessions.\n\n5. What we keep, and why\nSome records are anonymized rather than destroyed. Your past orders, quotes, and support tickets stay in our systems with the personal details scrubbed out, because they have real, ongoing business and legal value that doesn't depend on knowing it was you:\n- Order, quote, and ticket history: kept for accounting, tax records, and fraud prevention, with your name/email/phone replaced by an anonymized placeholder. The order itself (what was bought, when, for how much) stays; who bought it doesn't.\n- Payment and transaction records: required for bookkeeping and tax compliance, retained per applicable financial recordkeeping laws.\n- Security and fraud-prevention logs: kept long enough to protect our systems and other customers from abuse.\nWe don't keep any of this longer than necessary for these specific purposes, and none of it is used to re-identify you or re-contact you once your account is deleted.\n\n6. Third-party sign-in (Google, Facebook, Twitch, Discord, Instagram)\nEric's 3D Services supports signing in with Google, Facebook, Twitch, and Discord, and verifying an Instagram Business/Creator account as part of an affiliate application. When you connect one of these, we receive and store basic profile information from that provider -- typically your name or username, a unique account ID, and (depending on the provider) an email address or, for Instagram specifically, your username.\nIf you delete your Eric's 3D Services account, this stored information is deleted along with everything else in section 4.\nDisconnecting a provider without deleting your whole account: you don't have to delete your entire account just to remove one connected sign-in method. Go to Account Settings -> Linked accounts and click Disconnect next to any provider. This removes that connection from our side immediately, without scheduling a deletion or affecting the rest of your account.\nThis does not revoke access on the provider's side. Disconnecting Google, Facebook, Twitch, Discord, or Instagram from your Eric's 3D Services account only removes our copy of that connection -- it does not automatically remove Eric's 3D Services from the list of apps authorized on your Google, Facebook, Twitch, Discord, or Instagram account. To fully revoke that, visit the relevant provider's own settings:\n- Google: myaccount.google.com -> Security -> Third-party apps with account access\n- Facebook / Instagram: facebook.com -> Settings -> Apps and Websites\n- Twitch: twitch.tv -> Settings -> Connections\n- Discord: Discord -> User Settings -> Authorized Apps\n\n7. Data we don't control\nWe can only delete data stored in our own systems. We have no ability to delete, access, or control information that Google, Facebook, Twitch, Discord, or Instagram retain on their own platforms -- that data belongs to your relationship with them, not with us. Any request about what those companies store about you needs to go directly to them, through their own privacy tools and policies.\n\n8. Contact us\nQuestions about this policy, or need help with a deletion request you can't complete yourself? Reach out:"
 }
}